S chamber dryer up to 200 / 300 °C

When 300 °C is more than enough

The S dryers are designed primarily for drying, vulcanising, preheating, and curing a variety of materials. These dryers’ stainless steel muffles ensure a long service life for these facilities, as they are very chemically and mechanically resistant. Thanks to the horizontal internal atmosphere circulation, S dryers also boast an even temperature distribution.

I’m interested in this furnace

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.

sales@lac.cz We’ll reply within 24 hours.

Furnaces in stock Furnaces and dryers ready for pick-up

Benefits

Easy to install, easy to control
Custom adjustments
Delivery times within 6 weeks
24-month warranty
The lowest temperature
Even temperature distribution
Mechanical durability
Chemical durability
Easy increasing of heating output
Easy maintenance

Charge treatment technology

(PS = partially suitable)

Drying
Vulcanisation
Curing
Low-temperature material treatment
Incineration, combustion, annealing loss
Preheating
Heat treatment of metal materials
Material testing (PS)
Annealing, reducing internal stress
Heating
Drying moulds and cores
Preheating reusable moulds and semi-finished products
Preheating castings
Preheating moulds
Preheating prior to forging
Drying
Tempering
Firinga

S 400/02 chamber dryer

Furnace type	Tmax °C	Recommended operating temperature range in °C	Volume in l	External dimensions (w × h × d) mm	Internal dimensions (w × h × d) mm	Shelf pcs	Weight in kg	Fan pcs	Input in kW	Protection*	Voltage V	Max. load capacity of bottom in kg
S 60/02	200	100 - 200	60	1050×1350×950	450×300×450	1	130	1	2,0	16/1	230	40
S 100/02	200	100 - 200	100	1050×1550×1000	450×500×450	1	180	2	3,0	16/1	230	50
S 250/02	200	100 - 200	240	1400×1550×1200	800×500×600	1	250	1	4,0	16/3	400	70
S 400/02	200	100 - 200	380	1400×1750×1200	800×800×600	1	350	1	4,0	16/3	400	70
S 60/03	300	100 - 300	60	1050×1350×950	450×300×450	1	130	1	3,0	16/1	230	40
S 100/03	300	100 - 300	100	1050×1550×1000	450×500×450	1	180	2	3,0	16/1	230	50
S 250/03	300	100 - 300	240	1400×1550×1200	800×500×600	1	250	1	4,0	16/3	400	70
S 400/03	300	100 - 300	380	1400×1850×1200	800×800×600	1	350	1	6,0	16/3	400	70

*Protection can vary depending on accessories added (at additional cost).
Subject to technical changes.

Standard equipment

Ht40AL controller (1 programme: 2x run-up, 2x dwell)
resistance heating (heating elements)
insulation using a mineral-fibre mat
thermostat (use as a limit unit)
manually controlled ventilation flap for cooling the furnace’s operational space
manually controlled suction flap
stainless steel muffle
stainless steel circulation insert with long service life
horizontal internal atmosphere circulation
door manually opened towards the side
“K” type thermocouple
contactless switching relay for noise-free operation
door limit switch for safe opening of the furnace
stand
shelf

Optional accessories available at additional cost

Ht205 controller (30 programmes with 15 steps each) / Ht200 controller (30 programmes with 25 steps each, USB interface)
graphic temperature recorder
automatic ventilation flap for cooling the furnace’s operational space
exhaust fan for forced drawing off of flue gases
travel wheels
transport door opening
optimisation of the temperature field for DIN 17052-1 ΔT10 °C in the internal usable space (in an empty furnace at Tmax)
measuring loop calibration
other shelves
EIA-485 or LAN interfaces
HtMonit set EV (including software + interface)
door opening towards the top (electro-hydraulically)
door opening towards the top (pneumatically – pantograph)
door opening towards the top (manually – pantograph)
relative humidity measurement
METREX gas analyser
forced cooling
door inspection window
interior furnace lighting
one-handed door closing

Note: When combining accessories (at additional cost), consult with our technical office.

Adaptations for rubber industry

exhaust fan in furnace ceiling with automatic flap and insulated fan and suction.
the distance between the furnace and the fan must be minimised.
air volume extracted based on the furnace volume (e.g. 700 m³/hour drawn off for the SV 3300/250). The furnace must function in underpressure.
fan exhaust with tilt away from fan for draining condensate
opening at the lowest point in the exhaust for drawing off condensate (to be executed by customer)
automatic suction flap on the fan unit