PP tempering furnace up to 650 / 850 °C

The smallest furnace with air circulation that is suitable even for temperatures below 600 °C

Even heating of the charge thanks to horizontal internal atmosphere circulation—this is the greatest advantage of this tempering furnace. The precision of the temperature distribution, its guided increase and decrease and controlled cooling (at additional cost) will, when used together, give you complete control over the process taking place within the furnace’s chamber.

PP furnaces are regularly used in industry, and so they are truly robust and sturdy, and the smaller volume furnaces are also very compact and space-saving. Ideal for Ideal for sub-industrial plants and laboratory. If you treat them with at least a little respect, they will stick around with you for a good long time.

I want this furnace

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.
sales@lac.cz We’ll get back to you within 24 hours.

Furnaces in stock Furnaces and dryers ready for pick-up

Benefits

  • Easy to install, easy to control
  • Custom adjustments
  • Delivery times within 6 weeks
  • Low noise
  • 24-month warranty
  • Immediate technical support
  • Forced air circulation
  • Superb conduction of heat into the charge
  • Even temperature distribution
  • Mechanical durability
  • Industrial robustness

Charge treatment technology

(PS = partially suitable)
  • High-temperature tempering
  • Low-temperature tempering
  • Tempering of tool steels with a protective atmosphere (in the semi-gastight version)
  • Annealing
  • Solution annealing
  • Annealing for relieving stress
  • Soft annealing
  • Recrystallisation annealing
  • Heat treatment of metal materials
  • Artificial ageing
  • Heating and drying
  • Preheating
  • Material testing
  • Curing
  • Enamel firing
  • Incineration, combustion, annealing loss (PS)
  • Sintering (PS)
PP-140_65-tempering-furnace.jpg PP 140/65 tempering furnace
PP-140_65-tempering-furnace.jpg PP 140/65 tempering furnace

Technical parameters

Furnace equipment

Furnace type Tmax°C Recommended operating temperature range in °C Volume in l External dimensions (w × h × d) mm Internal dimensions (w × h × d) mm Shelf pcs Input* in kW Weight in kg Protection**  Voltage V Max. load capacity of bottom in kg
PP 20/65 650 200 - 600 20 800×650×1000 300×200×350 3,0 130 16/1 230 30
PP 40/65 650 200 - 600 35 850×1450×1050 300×300×400 2 6,0 200 16/3 400 50
PP 70/65 650 200 - 600 70 850×1550×1150 350×400×500 2 8,0 186 20/3 400 80
PP 140/65 650 200 - 600 135 950×1650×1300 450×500×600 2 12,0 244 20/3 400 150
PP 270/65 650 200 - 600 270 1200×1750×1450 600×600×750 2 20,0 580 40/3 400 240
PP 540/65 650 200 - 600 540 1300×1950×1750 750×800×900 2 24,0 850 50/3 400 500
PP 750/65 650 200 - 600 750 1300×1950×2100 750×800×1250 2 36,0 1000 63/3 400 500
PP 20/85 850 300 - 800 20 850×700×1050 300×200×350 3,0 130 16/1 230 30
PP 40/85 850 300 - 800 35 850×1450×1050 300×300×400 2 7,0 200 20/3 400 50
PP 70/85 850 300 - 800 70 900×1550×1150 350×400×500 2 9,0 250 20/3 400 80
PP 140/85 850 300 - 800 135 1000×1650×1250 450×500×600 2 14,0 350 25/3 400 150
PP 270/85 850 300 - 800 270 1200×1750×1650 600×600×750 2 20,0 580 40/3 400 240
PP 540/85 850 300 - 800 540 1350×1950×1800 750×800×900 2 30,0 850 50/3 400 500
PP 750/85 850 300 - 800 750 1350×1950×2100 750×800×1250 2 40,0 1000 80/3 400 500
*The power input for the fan motor in the PP 20 models is 0.25 kW. For the PP 40 – PP 140 models and for the PP 270/65, it is 0.37 kW for all temperatures. For the PP 270/85 and PP 540 – PP 750 models, it is 1.1 kW for all temperatures.
**Protection can vary depending on accessories chosen (at additional cost).
Subject to technical changes.

Standard equipment

  • Ht205 controller (30 programmes with 15 steps each)
  • 2 stainless steel or refractory shelves (except for the PP 20)
  • Manually controlled ventilation flap for cooling the furnace’s operational space
  • Contactless switching relay for noise-free operation
  • Limit switch for safe opening of the furnace
  • Door manually opening towards the right-hand side
  • Stand (except for the PP 20 table version)

Optional accessories available at additional cost

  • Ht200 controller (30 programmes with 25 steps each, USB interface)
  • Protective atmosphere supply (manually or automatically controlled gas intake)
  • Semi-gastight furnace version (cannot be combined with the automatic ventilation flap)
  • Tree-channel digital temperature recorder
  • Automatic ventilation flap for cooling the furnace’s operational space
  • Optimisation of the temperature field for compliance with DIN 17052-1 ΔT 10 °C in the internal usable space (in an empty furnace at Tmax, a grommet for thermocouples is required)
  • Measuring loop calibration
  • EIA-485 or LAN interface
  • HtMonit EV set (contains software + interface)
  • Controlled overpressure forced cooling (cannot be combined with the semi-gastight furnace version)
  • Uncontrolled overpressure forced cooling (cannot be combined with the semi-gastight version)
 

Custom additional components

  • Custom stand
  • Door opening to the left or upwards (hydraulically controlled, pneumatically controlled)
  • Additional shelves
  • Operating container for heat treatment with automatic supply of protective atmosphere (instead of shelves)
  • One-handed opening (for models PP 20 through PP 140 inclusive, this is standard equipment)

Note: When combining accessories (at additional cost), consult with our technical office.
Almost 20.000 furnaces manufactured
Our own team of maintenance technicians
25-member design team
6 custom projects per month
Testing of your specific charges

Furnaces and Dryers>

Refractory Castable Shapes>

https://www.lac.cz/en/furnaces-and-dryers/pp-tempering-furnace | https://www.lac.cz/en/furnaces-and-dryers/pp-tempering-furnace