KNC/V vertical chamber furnace with forced circulation up to 650 / 850 °C

Meets even the very strict demands of the DIN, AMS, and CQI standards

The chamber furnaces with forced air circulation are used for all types of heat treatment (tempering, artificial ageing, preheating, hot connecting, charge testing, drying out, etc.) under normal atmosphere, where demand exists for very precise temperature distribution and a dynamic course of the temperature curve.

I’m interested in this furnace

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.

sales@lac.cz We’ll reply within 24 hours.

Furnaces in stock Furnaces and dryers ready for pick-up

Benefits

Precise control over the furnace thanks to a PID controller
Custom adjustments
24-month warranty
Forced internal atmosphere circulation
Even temperature distribution
Robust

Charge treatment technology

Normalisation annealing
Solution annealing of non-ferrous metals
Annealing of non-ferrous metals
Soft annealing
Recrystallisation annealing
Annealing for relieving stress
Artificial ageing
Low-temperature tempering
High-temperature tempering
Curing
Preheating
Mould drying

KNC/V 540/65 vertical chamber furnace with forced circulation

Furnace type	Tmax°C	Recommended operating temperature range°C	Volumel	External dimensions (w × h × d)mm	Internal dimensions (w × h × d)mm	InputkW	Weightkg	VoltageV	Protection*A	Max. load capacity of bottomkg
KNC/V 270/65	650	300 - 600	270	1600×1250×2500	700×650×600	18	800	400	50/3	400
KNC/V 540/65	650	300 - 600	540	1800×1350×2900	900×750×800	24	1100	400	80/3	600
KNC/V 1000/65	650	300 - 600	1000	2350x1600x2900	1000×1000×1000	36	1300	400	80/3	800
KNC/V 1500/65	650	300 - 600	1500	2850x1600x2900	1500×1000×1000	60	1400	400	125/3	1000
KNC/V 2000/65	650	300 - 600	2000	3200x1500x2350	2000×1000×1000	75	1700	400	160/3	1500
KNC/V 270/85	850	300 -.800	270	1600x1250x2500	700×650×600	24	800	400	80/3	400
KNC/V 540/85	850	300 - 800	540	1800x1350x2900	900×750×800	36	1100	400	100/3	600
KNC/V 1000/85	850	300 - 800	1000	2350x1600x2900	1000×1000×1000	48	1300	400	100/3	800
KNC/V 1500/85	850	300 - 800	1500	2850x1600x2900	1500×1000×1000	64	1400	400	125/3	1000
KNC/V 2000/85	850	300 - 800	2000	3200x1500x2350	2000×1000×1000	90	1700	400	160/3	1500

* Protection can vary depending on accessories added (at additional cost).
Subject to technical changes.

Standard equipment

Ht205 controller (30 programmes with 15 steps each)
Resistance heating (meanders)
Insulation using insulation blocks made of mineral-fibre and lightweight refractory bricks
“K” type thermocouple
Terminal switching relays for safe opening of the furnace
Limit unit
Hydraulically controlled door opening towards the back

Optional accessories available at additional cost

Ht200 controller (30 programmes with 25 steps each, USB interface)
Optimisation of the temperature field to meet the DIN 17052-1 ΔT 10 °C standard in the internal usable space (in an empty furnace at Tmax) including a report from measuring
Measuring loop calibration (thermocouple + controller)
Grommet for the TUS test measuring thermocouple
EIA-485 or LAN interface
HtMonit EV set (contains software + interface)
Three-channel digital temperature recorder
Ammeters for checking the status of the heating elements
Foot-operated switch for door opening