LAC >Furnaces and Dryers > > > VP high-temperature furnace

VP high-temperature furnace up to 1600 / 1700 / 1800 °C

For experiments, testing, and heat treatment where lower temperatures simply are not enough

The VP furnaces are specially designed for high-temperature applications. Avoid them if you also need to work at temperatures lower than 1200 °C. At temperatures that low, these high-temperature furnaces lose the precision of their temperature distribution, and thus the heating elements can be destroyed.

I want this furnace

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.

sales@lac.cz We’ll get back to you within 24 hours.

Furnaces in stock Furnaces and dryers ready for pick-up

Benefits

Easy to install, easy to control
Custom adjustments
Delivery times within 8 weeks
Noise-free operation
24-month warranty
Immediate technical support
Highest temperatures
Controller with 30 programmes

Charge treatment technology

(PS = partially suitable)

Sintering
Melting metal materials (PS)
Material testing

VP high-temperature furnace

Furnace type	Tmax°C	Recommended operating temperature range in °C	Volume in l	External dimensions* (w × h × d) mm	Internal dimensions (w × h × d) mm	Nominal input in kW	Max. input in kW	Weight in kg	Protection**	Voltage V	Max. load capacity of bottom in kg
VP 02/16	1600	1100 - 1550	2	660×680×740	130×150×135	2,0	2,5	90	16/1	230	1
VP 04/16	1600	1100 - 1550	4	660×680×740	130×160×180	3.3	3,5	100	16/1	230	4
VP 10/16	1600	1100 - 1550	10	850×1595*×775	200×200×250	5,9	8,3	290	25/3	400	6
VP 20/16	1600	1100 - 1550	20	850×1595*×775	250×250×310	7,0	8,3	315	32/3	400	10
VP 70/16	1600	1100 - 1550	70	1100×1750*×1150	400×300×600	16,9	20	350	63/3	400	20
VP 02/17	1700	1100 - 1650	2	660×680×740	130×150×135	2,0	2,5	90	16/1	230	1
VP 04/17	1700	1100 - 1650	4	660×680×740	130×160×180	3,3	3,5	100	16/1	230	4
VP 10/17	1700	1100 - 1650	10	850×1595*×775	200×200×250	5,9	8,3	290	25/3	400	6
VP 20/17	1700	1100 - 1650	20	850×1595*×775	250×250×310	7,0	8,3	315	35/3	400	10
VP 70/17	1700	1100 - 1650	70	1100×1750*×1150	400×300×600	16,9	20	350	63/3	400	20
VP 02/18	1800	1100 - 1750	2	660×680×740	130×150×135	1,8	2,5	90	16/1	230	1
VP 04/18	1800	1100 - 1750	4	660×680×740	130×160×180	2,9	3,5	100	16/1	230	4
VP 10/18	1800	1100 - 1750	10	850×1595*×775	200×200×250	5,2	8,3	290	25/3	400	6
VP 20/18	1800	1100 - 1750	20	850×1595*×775	250×250×310	6,2	8,3	315	32/3	400	10

* Dimensions including stand.
**Protection can vary depending on accessories chosen (at additional cost).
Subject to technical changes.

Standard equipment

HtIndustry/Ht205 controller (30 programmes with 15 steps each)
frameless furnace construction made up of a bent-sheet stainless steel jacket (VP 02 and VP 04 furnaces; tabletop variant)
framed construction with stainless steel front and doors (furnaces VP 10 through VP 70)
MoSi2 heating elements in the sides
insulation using ceramic-fibre plates
forced cooling of the jacket using fans
“B” type thermocouple
contactless switching relay regulating the primary transformer circuit for noise-free operation
limit switch for safe opening of the furnace
door opened towards the side
tabletop (VP 02; VP 04) and free-standing (VP 10 through VP 70) variants

Optional accessories available at additional cost

intake of protective atmosphere (manually or automatically controlled gas intake)
calibration of the controller’s measuring input
RS232 or EIA485 interface
HtMonit set (software + interface)

Note: When combining accessories (at additional cost), consult with our technical office.