PTSP gas melting tilting furnace up to 1200 °C

Easy pouring of melting product thanks to tilting feature

This furnace is used for melting aluminium alloys with the option to transfer the melting product into a transport ladle or a transport holding furnace for conveyance to its next point of processing.

I want this furnace

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.

sales@lac.cz We’ll get back to you within 24 hours.

Furnaces in stock Furnaces and dryers ready for pick-up

Benefits

Easy to install, easy to control
Custom adjustments
24-month warranty
Mechanical durability
High melting output
Minimal heat losses due to the use of top-quality insulation materials and a rotary lid
Long service life for crucible through the use of an alloy collar
Protection of the furnace against any damage to the crucible, in the form of a safety opening in the bottom of the furnace

Charge treatment technology

Melting of aluminium and aluminium alloys

PTSP 600 melting gas tilting furnace

Furnace type	Capacitykg Al	Tmax (in furnace chamber)°C	Recommended operating temperature range (in crucible)°C	Crucible typeNoltina	Volume of cruciblel	External dimensions (w × h × d)mm	Weightkg	Burner power intakekW	Melting output at 700 °C**kg Al/hour
PTSP 180/12	145	1200	650 - 1000	TP 287	55	2850×1350×1600	2000	300	220
PTSP 330/12	285	1200	650 - 1000	TP 412	130	2900×1550×1750	2400	300	240
PTSP 370/12	340	1200	650 - 1000	TP 412 H	160	3000×1850×1700	3000	300	260
PTSP 570/12	490	1200	650 - 1000	TP 587	200	3200×1750×1850	3800	390	400
PTSP 750/12	840	1200	650 - 1000	TBN 800	320	3400×2050×2000	4300	450	420
PTSP 1000/12	1050	1200	650 - 1000	TBN 1100	400	3400×2300×2000	5300	450	450

* Stated furnace width is inclusive of the burner inlet. Stated furnace height is inclusive of the closed lid.
** The melting output values specified in the table are maximum ones. They are achievable if the conditions mentioned below are complied with. Approximately 80% of the maximum value of melting output is achieved during real operation.

Standard equipment

Crucible
Ht40B controller (3 programs with 10 steps each)
Limit unit
Flue gas extraction on the side of the furnace according to the possible solutions offered in the table + crucible cover according to the selected variant of flue gas extraction
Crucible protective collar
Weishaupt burner
Connection between the switchboard and the furnace in metal hoses with protective metal sheath
The hydraulic unit is on the right side of the oven, the hand lever control, located on the hydraulic aggregate on the right side of the furnace

Optional accessories available at additional cost

Charging thermocouple with protective tube
Thermocouple in the crucible wall
Controller measuring loop calibration (thermocouple + controller)
Connection between the furnace and switchboard within a metal hose with a metal sheath. Always necessary for lengths over 5 m
System to check for cracks in the crucible
Oil burner
Double fuel burner

Note: When combining accessories (at additional cost), consult with our technical office.