L chamber furnace up to 1200 °C

Universal furnace suitable for artists, ceramic workshops and professional potters

The L front loading chamber furnace is suitable for firing small enamel and ceramics products, firing decors on glass and porcelain, glass sintering and for all types of firing and glaze tests, where the emphasis is on the accuracy of temperature distribution, its controlled rise and fall, or controlled cooling. You will appreciate the well-roundedness of this facility. Thanks to its heating spirals placed within ceramic plates, this furnace is partially protected against mechanical and chemical damage. The L furnaces have a venting bleeder for drawing off flue gases.

I want this kiln

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.
sales@lac.cz We’ll reply within 24 hours.

Furnaces in stock Furnaces and dryers ready for pick-up

Benefits

  • Easy to install, easy to control
  • Custom adjustments
  • Delivery times within just 2 days
  • Noise-free operation
  • 24-month warranty
  • Immediate technical support
  • Quick run-up to Tmax
  • Even temperature distribution
  • Universal usability
L-front-loading-chamber-furnace.jpg L front loading chamber furnace
L-front-loading-chamber-furnace-1.jpg L front loading chamber furnace 03/12
L-front-loading-chamber-furnace.jpg L front loading chamber furnace
L-front-loading-chamber-furnace-1.jpg L front loading chamber furnace 03/12

Technical parameters

Furnace equipment

Furnace type Tmax°C Recommended operating temperature range°C Volumel External dimensions (w × h × d)mm Internal dimensions (w × h × d)mm InputkW Weightkg Protection*A VoltageV Max. load capacity of bottomkg
L 03/12 1200 700 - 1150 3 380×440×400 180×100×140 1,2 20 16/1 230 4
L 05/12 1200 700 - 1150 5 430×470×430 230×130×170 2,4 26 16/1 230 6
L 09/12 1200 700 - 1150 9 430×505×500 230×170×240 3,0 30 16/1 230 6
L 15/12 1200 700 - 1150 15 450×505×600 250×170×340 3,5 40 16/1 230 6
*Protection can vary depending on accessories added (at additional cost).
Subject to technical changes.

Standard equipment

  • Ht40AL controller (1 programme: 2x run-up, 2x dwell)
  • heating elements in ceramic panels
  • insulation using mineral-fibre plates
  • ventilation chimney for venting the furnace’s operational space
  • “S” type thermocouple
  • contactless switching relay for noise-free operation
  • limit switch for safe opening of the furnace
  • door manually opened downwards
  • power cable fitted with one-phase plug
  • tabletop variant

Optional accessories available at additional cost

  • HtIndustry/Ht205 controller (30 programmes with 15 steps each)/Ht200 controller (30 programmes with 25 steps each, USB interface)
  • injector with exhaust fan and pull interruptor (only with HtIndustry/Ht205/Ht200 controller)
  • protective plate for bottom
  • intake of protective atmosphere (manually or automatically controlled gas intake)
  • calibration of the controller’s measuring input
  • RS232 or EIA485 interfaces including software and cabling
  • HtMonit set (software + interface)
 
Note: When combining accessories (at additional cost), consult with our technical office.
Almost 20.000 furnaces manufactured
Our own team of maintenance technicians
25-member design team
6 custom projects per month
Testing of your specific charges

Furnaces and Dryers>

Refractory Castable Shapes>

https://www.lac.cz/en/furnaces-and-dryers/l-front-loading-chamber-furnace | https://www.lac.cz/en/furnaces-and-dryers/l-front-loading-chamber-furnace