K front loading chamber kiln up to 1300 / 1340 / 1400 °C

When you need to fire ceramics in larger amounts

Mainly used in the ceramics sector for firing decorative and industrial ceramics in large amounts. This kiln’s shape and design ensure perfect temperature distribution and the option of quick run-up to the required temperature.

I want this kiln

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.

sales@lac.cz We’ll reply within 24 hours.

Furnaces in stock Furnaces and dryers ready for pick-up

Benefits

Robust steel structure
Ventilation that prevents vapour condensation during firing (reduces corrosion)
Heating from five sides, including the bottom
Top-quality insulation materials (low electrical energy consumption, option for quick run-up to the required temperature)
Solid state relay (smooth and noise-free operation, minimal interference with surrounding equipment)
36-month warranty

K 120/13 chamber furnace

Furnace type	Tmax°C	Recommended operating temperature range°C	Volumel	External dimensions* (w × h × d)mm	Internal dimensions (w × h × d)mm	InputkW	Weightkg	Protection**A	VoltageV	Max. load capacity of bottomkg
K 50/13	1300	700 - 1250	50	910×1405×1070	350×350×400	5,5	125	16/3	400	50
K 70/13	1300	700 - 1250	80	910×1465×1070	350×450×450	7,5	165	16/3	400	50
K 120/13	1340	700 - 1300	120	1010×1535×1140	450×530×500	10,5	260	16/3	400	80
K 150/13	1340	700 - 1300	150	1010×1620×1160	450×600x530	15	320	25/3	400	80
K 200/13	1340	700 - 1300	200	1060×1800×1185	500×750×530	20	360	40/3	400	120
K 250/13	1340	700 - 1300	230	1090×1800x1230	520×800×550	23	420	40/3	400	120
K 300/13	1340	700 - 1300	310	1105×1820×1340	560×800×710	27	480	63/3	400	200
K 500/13	1340	700 - 1300	490	1460×1825×1460	650×1000×750	40	770	80/3	400	300
K 700/13	1340	700 - 1300	730	1550x1925x1610	750×1100×900	60	990	100/3	400	400
K 1000/13	1340	700 - 1300	1000	1570×2120×1775	800×1220×1000	75	2300	125/3	400	500
K 1500/13	1340	700 - 1300	1540	1800x2300×2050	950×1350×1200	110	2950	200/3	400	800
K 2000/13	1340	700 - 1300	2100	2150×2500×2450	1000×1500×1400	130	3300	250/3	400	1000
K 120/14	1400	700 - 1350	120	1010×1535×1140	450×530×500	10,5	230	16/3	400	80
K 150/14	1400	700 - 1350	150	1010×1620×1160	450×600×530	15	280	25/3	400	80
K 200/14	1400	700 - 1350	200	1060×1800×1185	500×750×530	20	310	40/3	400	120
K 250/14	1400	700 - 1350	230	1090×1800×1230	520×800×550	23	360	40/3	400	120
K 300/14	1400	700 - 1350	310	1105×1820×1340	560×800×710	27	420	63/3	400	200
K 500/14	1400	700 - 1350	490	1460×1825×1460	650×1000×750	40	700	80/3	400	300
K 700/14	1400	700 - 1350	730	1550×1925×1610	750×1100×900	60	920	100/3	400	400
K 1000/14	1400	700 - 1350	1000	1570×2120×1775	800×1263×1000	75	1550	125/3	400	500
K 1500/14	1400	700 - 1350	1540	1800×2300×2050	950×1350×1200	110	2600	200/3	400	800
K 2000/14	1400	700 - 1350	2100	2150×2500×2450	1000×1500×1400	130	2900	250/3	400	1000

*For the furnaces’ exterior dimension, the height is given including the stand (K 50 – K 300). The stand’s height is 615 mm. The stated width, meanwhile, includes the controller 160 mm (K 50 – K 300) and the switchboard 250 mm (K 500 – K 2000).
**Protection can vary depending on accessories chosen (at additional cost).
Subject to technical changes.

Standard equipment

HtCeramic controller (20 programmes with 15 steps each)
SiC plate at bottom of furnace
heating spirals made from Kanthal APM (only for furnaces for temperatures of 1400 °C)
Alsint ceramic tubes (only for furnaces for temperatures of 1400 °C)
stand for K 50 through K 300
slide valve for controlling air intake at the bottom of the furnace
ventilation bleeder (K 50 – K 300)
manually controlled ventilation flap (K 500 – K 2000)
power supply cable (K 50/13 – K 300/13 and K 120/14 – K 300/14)
door opening towards the left
limit switch for safe opening of the furnace

Optional accessories available at additional cost

HtIndustry/Ht205 controller (30 programmes with 15 steps each)
heating spirals made from Kanthal APM (for furnaces for temperatures of 1300 °C)
Alsint ceramic tubes (for furnaces for temperatures of 1300 °C)
manually controlled ventilation flap (K 50 – K 300)
automatic ventilation flap
graphic temperature recorder (for the K 50 through K 300, the controller and recorder are located in a small switchboard on the side of the furnace)
calibration of the controller’s measuring input
LAN or EIA485 connection (not possible with HtCeramic controller)
HtMonit set (software + interface; not possible with HtCeramic controller)
custom stand for K 50 through K 300
door opening towards the right

Note: When combining accessories (at additional cost), consult with our technical office. When combining at least two accessories (automatic ventilation flap, overpressure forced cooling, graphic temperature recorder), an HtIndustry/Ht 205 controller is needed.