SP 2000/15, SP 2200/15, SP 2600/15 and SP 1200/15 hardening furnaces up to 150 °C

Furnaces for curing gap filler in automobile sensors

The customer’s requirement was to minimise run-up, achieve the required capacity and heat distribution directly by the parts and keep the gap filler from being influenced until it was cured (i.e. to prevent it from being shifted or influenced by the circulating air). This was resolved via special conveyor routing and a powerful circulation system. We used a suitable distance between the parts and the place where circulating air exited the furnace; the circulation was even and thus the gap filler was not influenced.
 
A continuous annealing furnace with heating and cooling zones that has a chain conveyor and an automatic manipulator. A multi-zone heating system. The furnaces are controlled by a Simatic programmable automated system. 

How the lines are organised so they smoothly connect to the previous and next operations. Precise and fast manipulation of the charge with a temperature distribution of ± 5 °C

This technology requires smooth operation of the conveyor so the level of the gap filler does not change until the entire process is complete. Thus the furnaces are controlled by a frequency converter which includes a precisely routed chain conveyor.
 

I want something like this

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.
sales@lac.cz We’ll get back to you within 24 hours.
Furnaces in stock Furnaces and dryers ready for pick-up

What’s great about this furnace

  • splnění požadované kapacity pece
  • splnění požadované maximání doby náběhu pece na teplotu
  • skvělé rozložení teploty +/- 5 °C
  • speciální dopravník řízený frekvenčním měničem, velmi přesné vedení dopravníku
  • výkonná, ale rovnoměrná cirkulace vzduchu
Furnaces-for-curing-gap-filler-in-automobile-sensors-SP-1200_12.jpg
Furnaces-for-curing-gap-filler-in-automobile-sensors-SP-2200_15.jpg
Furnaces-for-curing-gap-filler-in-automobile-sensors-SP_2200_15.jpg
Furnaces-for-curing-gap-filler-in-automobile-sensors-SP-1200_12.jpg
Furnaces-for-curing-gap-filler-in-automobile-sensors-SP-2200_15.jpg
Furnaces-for-curing-gap-filler-in-automobile-sensors-SP_2200_15.jpg

Technical parameters

SP 2000/15
 
  • Max. temperature: 150 °C
  • Recommended operating temperature range: 100–150 °C
  • Heat distribution in the furnace’s operational space: ± 5 °C
  • Internal dimensions (w × h × d): 1900 × 300 × 4200 mm
  • Charge: automobile sensors with gap filler
  • Cycle: 1 pc/52 s
  • Conveyor type: chain
  • Number of heating zones: 3
  • Heating input: 59 kW
  • Voltage: 3/N/PE 400/230V AC 50 Hz
  • Control system: SIMATIC S7-1200
  • Installation place and year: Czech Republic, 2014
 
SP 2200/15
 
  • Max. temperature: 150 °C
  • Recommended operating temperature range: 100–150 °C
  • Heat distribution in the furnace’s operational space: ± 5 °C
  • Internal dimensions (w × h × d): 1400 × 250 × 5800 mm
  • Charge: automobile sensors with gap filler
  • Cycle: 1 pc/40 s
  • Conveyor type: belt
  • Number of heating zones: 3
  • Heating input: 45 kW
  • Voltage: 3/N/PE 400/230V AC 50 Hz
  • Control system: SIMATIC S7-1200
  • Installation place and year: Czech Republic, 2011
 
SP 1200/15
 
  • Max. temperature: 150 °C
  • Recommended operating temperature range: 100–150 °C
  • Heat distribution in the furnace’s operational space: ± 5 °C
  • Internal dimensions (w × h × d): 800 × 2500 × 8100 mm
  • Charge: automobile sensors with gap filler
  • Cycle: 1 pc/40 s
  • Conveyor type: chain
  • Number of heating zones: 4
  • Heating input: 54 kW
  • Voltage: 3/N/PE 400/230V AC 50 Hz
  • Control system: SIMATIC S7-1200
  • Installation place and year: Czech Republic, 2011
 
SP 2600/15
 
  • Max. temperature: 150 °C
  • Recommended operating temperature range: 100–150 °C
  • Heat distribution in the furnace’s operational space: ± 5 °C
  • Internal dimensions (w × h × d): 1400 × 250 × 7600 mm
  • Charge: automobile sensors with gap filler
  • Cycle: 2 pcs/60 s
  • Conveyor type: chain
  • Number of heating zones: 4
  • Heating input: 60 kW
  • Voltage: 3/N/PE 400/230V AC 50 Hz
  • Control system: SIMATIC S7-1200
  • Installation place and year: Czech Republic, 2015
Almost 20.000 furnaces manufactured
Our own team of maintenance technicians
25-member design team
6 custom projects per month
Testing of your specific charges

Furnaces and Dryers>

Refractory Castable Shapes>

https://www.lac.cz/en/furnaces-and-dryers/custom-made-furnaces/furnaces-for-the-electrical-engineering-industry/furnaces-for-curing-gap-filler-in-automobile-senso/sp-2000-15,-sp-2200-15,-sp-2600-15-and-sp-1200-5 | https://www.lac.cz/en/furnaces-and-dryers/custom-made-furnaces/furnaces-for-the-electrical-engineering-industry/furnaces-for-curing-gap-filler-in-automobile-senso/sp-2000-15,-sp-2200-15,-sp-2600-15-and-sp-1200-5