SV Mk. II chamber dryer up to 300 °C

Our updated SV Mk. II dryers, which replace the older SV line

The SV Mk. II is a new line of dryers with significantly reduced air circulation compared to the SV dryers. For some types, this is even a tenfold reduction. One great advantage of these updated dryers is the option for a variety of custom adjustments and the very quick and easy designing of custom sizes.

I’m interested in this furnace

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.
sales@lac.cz We’ll reply within 24 hours.

Benefits

  • Easy to install, easy to control
  • We have spare parts in stock
  • Custom adjustments
  • Delivery times as low as 6 weeks
  • The lowest temperature
  • Temperature distribution ∆T 6 °C/∆T 10 °C
  • Quick run-up to max. temperature
  • 24-month warranty
  • Easy maintenance

Charge treatment technology

  • Drying moulds and cores
  • Preheating reusable moulds and semi-finished products
  • Artificial ageing
  • Preheating prior to forging
  • Preheating moulds
  • Drying
  • Curing
  • Tempering
  • Firing
  • Vulcanisation
  • Preheating
  • Preheating castings
chamber-dryer-SV_1001-30_Mk-II_opened.jpg SV Mk. II 1001/30 chamber dryer
chamber-dryer-SV_1001-30_Mk-II_closed.jpg SV Mk. II 1001/30 chamber dryer
chamber-dryer-SV_1001-30_Mk-II_opened.jpg SV Mk. II 1001/30 chamber dryer
chamber-dryer-SV_1001-30_Mk-II_closed.jpg SV Mk. II 1001/30 chamber dryer

Technical parameters

Dryer equipment

Download

Furnace type  Tmax°C Recommended operating temperature range in °C Volume in l External dimensions (w × h × d) mm Internal dimensions (w × h × d) mm Input in kW Weight in kg Voltage V Protection*  Max. load capacity of bottom in kg
SV 650/30 Mk.II 300 100 - 250 650 1800×1750×1200 1000×800×800 6 610 400 16/3 150
SV 1001/30 Mk.II 300 100 - 250 1000 1800×2150×1200 1000×1200×800 12 715 400 25/3 200
SV 1002/30 Mk.II 300 100 - 250 1000 1800×1950×1400 1000×1000v1000 12 760 400 25/3 200
SV 1501/30 Mk.II 300 100 - 250 1500 1800×2750×1200 1000×1800v800 18 870 400 40/3 350
SV 1502/30 Mk.II 300 100 - 250 1500 1800×2050×1800 1000v1100v1400 18 990 400 40/3 350
SV 1700/30 Mk.II 300 100 - 250 1700 1800×2650×1400 1000×1700×1000 24 970 400 50/3 400
SV 2400/30 Mk.II 300 100 - 250 2400 1800×2650×1800 1000×1700×1400 24 1200 400 50/3 600
SV 3001/30 Mk.II 300 100 - 250 3000 1800×3150×1800 1000×2200×1400 24 1400 400 50/3 700
SV 3002/30 Mk.II 300 100 - 250 3000 1800×2650×2200 1000×1700×1800 24 1450 400 50/3 700
SV 3300/30 Mk.II 300 100 - 250 3300 1900×2950×1900 1100×2000×1500 24 1450 400 50/3 800
SV 4000/30 Mk.II 300 100 - 250 4000 2000×2950×2000 1200×2000×1600 30 1550 400 63/3 1200
SV 4500/30 Mk.II 300 100 - 250 4500 2800×2150×2300 2000×1200×1900 36 1800 400 80/3 2000
SV 5000/30 Mk.II 300 100 - 250 5000 2500×2650×2100 1700×1700×1700 48 1750 400 100/3 2000
SV 6001/30 Mk.II 300 100 - 250 6000 2700×3150×1800 1900×2200×1400 58 1850 400 125/3 2000
SV 6002/30 Mk.II 300 100 - 250 6000 2800×2450×2400 2000×1500×2000 58 2050 400 125/3 2000
SV 8000/30 Mk.II 300 100 - 250 8000 2800×2950×2400 2000×2000×2000 72 2300 400 160/3 2000
SV 8700/30 Mk.II 300 100 - 250 8700 2500x2650x3400 1700x1700x3000 72 2600 400 160/3 2550
SV12600/30 Mk.II 300 100 - 250 12600 2700x3200x3400 1900x2200x3000 84 3000 400 160/3 2850
SV16000/30 Mk.II 300 100 - 250 16000 2800x2950x4400 2000x2000x4000 96 3500 400 200/3 4000
*External dimensions are listed without switchboards.
**Protection can vary depending on accessories chosen (at additional cost).
Subject to technical changes.

Standard equipment

  • Ht40P controller (10 programmes with 15 steps each) – for furnace sizes with volumes up to 8,000 l
  • Ht205 controller (30 programmes with 15 steps each) – for furnace sizes with volumes of over 8,000 l
  • resistance heating (heating elements)
  • ΔT 6 °C temperature distribution (applies for dryers with volumes up to 6,000 litres), without measurement protocol
  • ΔT 10 °C temperature distribution (applies for dryers with volumes over 6,000 litres), without measurement protocol
  • insulation using a mineral-fibre mat
  • smooth bottom or bottom modification for carriage
  • safety handle to prevent trapping in the furnace’s operational space
  • thermostat (use as a limit unit)
  • manually controlled ventilation flap for cooling the furnace’s operational space
  • manually controlled suction flap
  • “N” type thermocouple
  • contactless switching relay for noise-free operation
  • switchboard on the left side of the furnace
  • door limit switch for safe opening of the furnace
  • one-wing door manually opened to the right (for volumes up to 4,000 l); two-wing door (for volumes over 4,000 l)

Optional accessories available at additional cost

  • Ht205 controller (30 programmes with 15 steps each)
  • Ht200 controller (30 programmes with 25 steps each, USB interface)
  • automatic ventilation flap for cooling the furnace’s operational space (an Ht205 or Ht200 controller is needed)
  • automatic suction flap for cooling the furnace’s operational space (an Ht205 or Ht200 controller is needed)
  • guided underpressure forced cooling (an Ht205 or Ht200 controller is needed); includes a cooling fan and automatic flaps
  • measurement protocol for evenness of temperature (a cable entry system is needed for the TUS test and calibration of the measuring loop)
  • non-guided underpressure forced cooling (an Ht205 or Ht200 controller is needed); includes a cooling fan and automatic flaps
  • optimisation of the temperature field to meet the DIN 17052-01-∆T 4 °C standard in the internal usable space (in an empty furnace at Tmax); applies for dryers with a maximum volume of 6,000 litres (a cable entry system is needed for the TUS test and calibration of the measuring loop)
  • adaptations for the rubber industry (muffle insulation; exhaust fan and automatic flaps; an Ht205 or Ht200 controller is needed)
  • charging trolley with shelves of a steel construction (4 shelves up to a volume of 4,500 l; without shelves over 4,500 l)
  • loading frame with 4 shelves of a steel construction (only up to a volume of 4,500 l)
  • stainless steel muffle
  • graphic temperature recorder (an Ht205 or Ht200 controller is needed)
  • ammeters for checking the status of heating elements
  • measuring loop calibration
  • cable entry system for TUS test measuring thermocouples
  • RS232 or EIA485 interfaces including software and cabling for connecting the controller to a PC
  • HtMonit set (software + interface)
  • drive-up ramp
  • second door (furnace entry chamber)
  • relative humidity measurement
  • METREX gas analyser (an Ht205 or Ht200 controller is needed)
  • door inspection window with illumination
  • limit switch on carriage
  • electromechanical door lock (an Ht205 or Ht200 controller is needed)
  • meeting AMS 2750E/CQi-9 with the TUS protocol
 
Note: When combining accessories (at additional cost), consult with our technical office.
Over 13,000 furnaces manufactured
Our own team of maintenance technicians
25-member design team
6 custom projects per month
Testing of your specific charges
Want to know more about

Furnaces and Dryers>

Refractory Castable Shapes>

http://www.lac.cz/en/furnaces-and-dryers/sv-mk-ii-chamber-dryer | http://www.lac.cz/en/furnaces-and-dryers/sv-mk-ii-chamber-dryer