KE chamber furnace up to 1280 °C

A great choice for firing both decorative and industrial ceramics

Used primarily in the ceramics and glass industries for firing decorative and industrial ceramics, heat treatment of glass, and firing decorations in a chamber furnace. This furnace’s shape and design ensure perfect temperature distribution and the option of quick run-up to the required temperature. The furnace’s jacket is made of a glossy stainless steel sheet.

I want this furnace

+420 547 230 016 Call us from 8:00 a.m. to 2:00 p.m.
sales@lac.cz We’ll get back to you within 24 hours.

Benefits

  • Simple construction that significantly affects the price
  • Jacket made from a glossy stainless steel sheet
  • Air-cooled jacket
  • Furnace ventilation preventing condensation of vapours during firing
  • Perfect temperature distribution thanks to the layout of the heating spirals (for models with five heating spirals)
  • Top-quality insulation materials (low electrical energy consumption, option for quick run-up to the required temperature)
  • Programmable temperature control with high accuracy
  • Solid state relay (smooth and noise-free operation, minimal interference with surrounding equipment)
  • Superb workmanship, great technical equipment, and safe operation
  • Health-safe materials used
  • 36-month warranty
KE-125_12-chamber-furnace.jpg KE 125/12 chamber furnace
KE-125_12-chamber-furnace-2.jpg KE 125/12 chamber furnace
KE-125_12-chamber-furnace.jpg KE 125/12 chamber furnace
KE-125_12-chamber-furnace-2.jpg KE 125/12 chamber furnace

Technical parameters

Furnace equipment

Furnace type Tmax°C Recommended operating temperature range in °C Number of heating spirals (pcs) Volume in l External dimensions (w × h × d) mm Internal dimensions (w × h × d) mm Input in kW Weight in kg Protection*  Voltage V Manipulation width** mm
KE 125/12 1280 700 - 1200 3/5 125 930×910×940 500×500×520 9 180 16/3 400 780
KE 250/12 1280 700 - 1200 3/5 275 1080×1060×1150 650×650×670 14 260 25/3 400 930
KE 500/12 1280 700 - 1200 3/5 504 1130×1210×1330 700×800×910 19 390 32/3 400 980
*Protection can vary depending on accessories added (at additional cost).
** After removing the controller and the door closing mechanism.
Stand height is 540 mm.
Subject to technical changes.
 

Standard equipment

  • Ht40AL controller (1 programme: 2x run-up, 2x dwell)
  • door manually opened towards the left
  • heating from three sides
  • power supply cable
  • slide valve for controlling air intake
  • ventilation chimney

Optional accessories available at additional cost

  • HtCeramic controller (20 programmes with 15 steps each)
  • stand
  • furnace adapter for drying of charge before its placement in the oven
  • heating from five sides
  • spacing plates
  • spacer columns
  • calibration of the controller’s measuring input
  • RS230 or EIA485 interface (only with Ht40AL controller)
  • HtMonit set (software + interface; only with Ht40AL controller)
Note: When combining accessories (at additional cost), consult with our technical office.
Over 13,000 furnaces manufactured
Our own team of maintenance technicians
25-member design team
6 custom projects per month
Testing of your specific charges
Want to know more about

Furnaces and Dryers>

Refractory Castable Shapes>

http://www.lac.cz/en/furnaces-and-dryers/ke-chamber-furnace | http://www.lac.cz/en/furnaces-and-dryers/ke-chamber-furnace